Removing steps for Shortcut files in USB

Shortcut virus remover and know How to Recover Hidden Files From Virus Infected USB Pendrive without any Software

Shortcut virus might be hating it so here is some steps to remove it...

Just follow the below steps …..

Click on "Start" -->Run --> type cmd and click on OK.

Insert pen drive into computer and find drive letter of connected USB drive

For Example, E:

Now click on Start --> Run

In Run box, type cmd and hit Enter

Now command prompt will appear, in command prompt type the drive letter of your pen drive and hitEnter.

Example type E:

After that, type attrib -s -h /s /d *.*

                  

Now hit Enter and wait for sometime. That's all, you have done !!! Now you can view all your files in pen drive without any problems.

How to convert your USB drive into Bootable device

How to Convert Your USB Flash Drive into a Bootable Media:
Small portable computing devices such as Netbooks and MIDs (Mobile Internet Devices) offer great mobility, but they lack optical drives (CD/DVD). An optical drive is important when you need to install software from a CD or DVD. An external optical drive would work, but you may not want to lug it around with you. So what’s the solution? Use a USB flash drive as a bootable installation media:

What You Need:
A USB flash drive with good storage capacity; preferably 4GB or more.
Access to a computer running Windows Vista or Windows 7.

Getting Started:
1.Connect the USB flash drive to a computer running Windows Vista or 7 and follow the steps below:

2.Click Start > All Programs > Accessories > Right click on Command Prompt > Run as Administrator

3.Type ‘diskpart' and press Enter to start the built in Windows disk partitioning utility
 
4.Type 'list disk' and press Enter. Identify your USB Flash drive and make a note of the disk number.  Here in this example, My USB flash drive is Disk 1.

5.Type 'select disk 1' and press Enter.

6.Type ‘clean’ and press Enter. The clean command will remove partitions or volume formatting from the selected disk (disk 1) by zeroing sectors.

7.Now to create a partition, type 'create partition primary’ and press Enter.

8.Type 'select partition 1', and press the Enter key.

9.Type ‘active’, and hit the Enter Key.

10.To format the partition using FAT32 file system, type ‘format fs=fat32’ and press the Enter key.

11.Type 'assign' and press the Enter key to assign a drive letter to your USB flash drive. Type exit to exit the diskpart utility.
 
Your USB flash drive is now ready to be used as an installation media. All you need to do is copy the entire contents of the Operating System DVD to your newly prepared USB flash drive. Plug the USB flash drive to the computer and reboot to begin the installation.
 Listen Here: Make sure to set the first boot device to USB flash drive from the BIOS.